Please select size from the Drop Down Box. Width being the Total Opening Size (not Size of Each Gate). Height is to the highest point of the Gates. 145mm x 28mm Center and Bottom Rail.
All our Softwood Timber is a Planed 5th Scandinavian redwood (High quality pine). 14mm Tongue and Groove Boards (finished size).Due to transportation purposes there is a slight horn left on the bottom of the gates, this will need removing before fitting. These Gates Can be Made to Measure. All our Products are Made by Hand by Us. Because of the weight of these, we recommend hook and bands (not conventional hinges) to hang these Gates/Doors. The right hand gate (as looking from the front) will open outwards first. As standard unless requested otherwise. This Product Care Information will give you some basic. Guidelines to make sure that the Products that you have. Wood is a Natural Product which can be affected by Weather. Conditions, Failure to treat Correctly will result in the Timber.
Swelling, Warping, Splitting, Cracking and Bowing. There are a few basic tips that can also help keep your. Products looking good for years.
If you are not ready to hang, please Treat untreated. Softwood as soon as possible. Keep them stored flat until ready to hang. Remember to Treat at regular intervals, or when needed.
Pay particular attention to all end Grains and Joint areas. As the Gates / Doors settle down treat any area around.
Joints or Treat / Paint Cracks that appear. We recommend at least 3 coats of a SOLVENT based product. Always remember to Treat all Six sides.Both Sides and Top and Bottom. Staining, Do Not use a Water Based Product, these can cause the. Timber to reabsorb water and allow Rot to set in. Painting, we recommend using a wood preserver to use as a Base. Coat to seal the Timber, an example of this is Cuprinol Clear.
Preserver (actively prevents Rot and Decay). Followed by an Under coat and Several Coats of Paint. All of our products are wrapped in corrugated card with Foam corners and shrink wrapped for protection while in transport. All Orders will be delivered Monday to Friday as Standard.
Saturday Deliveries can be arranged at an extra cost. If you are in urgent need for any of our items please give us a call. Please Take a Look in our Shop for Many other Styles and Products.
We also offer all Designs in either Tanalised Timber or Cedar. We can now manufacture all of our timber products from. A Timber which has been through a.Thermal Modification Process, so no additional treatment needed. Thermowood is an environmentally and fully recyclable product. Please ask for a quote.
The process involves heating timber to a temperature of 180-220 degrees Celsius which darkens the colour. While at the same time protecting it with steam. 100% Natural no chemicals are added. Thermowood is an environmentally friendly and fully recyclable product.It remains dimensionally stable and the moisture content is also permanently reduced. The moisture content decreases to around 4-6 percent and does not react to changes in humidity drastically as untreated Timber. The cells of wood are modified and that caused changes in the wood characteristics. Resin is removed from the Timber and the process also decreases water absorption. The Timber can be stained or painted. If you would like any other Information or Advice on any of our Products. The item "WOODEN PAIR OF HAND MADE ARCHED DRIVEWAY GATE'S'CHANTRY" is in sale since Friday, January 16, 2015. This item is in the category "Garden & Patio\Garden Fencing, Privacy Screens & Gates\Garden Gates". The seller is "ktpltd" and is located in Warminster.
This item can be shipped to United Kingdom.