Laminated Wooden Tiller Made To Measure, Handmade, Bespoke

Hi, Welcome to my listing. I have been making Tillers for Boats of all shapes and sizes. I have made in excess of 1000 tillers and it never surprises me of the amount of different shapes and sizes that i have produced.

If you have a Tiller that requires upgrading, look no further as i can build it in around 14 days from start to finish and with 6 coats of hardwearing varnish should last years to come. If you are unsure of how to measure the best fit then look at the last picture and see what shape would be most desirable and the measure the width at the stock, height at the stock and the length overall with any rate of rise or fall. Alternatively, if you don't feel confident to do the measurements yourself you can either lay the old tiller on a piece of unused wall paper or pieces of A4 joined together and draw around it and send it to me or even simpler just send me your old tiller and i will replicate it and send you both tillers back so you can always keep one as a spare. I normally used Sapele and Ash/Idigbo but occasionally I use Iroko and oak or similar hardwoods. Feel free to ask any questions.

---